Bonfring International Journal of Industrial Engineering and Management Science

Impact Factor: 0.541 | International Scientific Indexing(ISI) calculate based on International Citation Report(ICR)


Prediction of Spot Welding Parameters for Dissimilar Weld Joints

B. Vijaya Sankar, I. Daniel Lawrence and S. Jayabal


Abstract:

Development of manufacturing systems are needed to invent new kind of methodology for joining process in current research and development. Spot welding technologies are widely applied in non-conventional joining process. In this investigation predicted the mechanical properties like tensile strength and Hardness. The hardness evaluated in different regions of the spot welded Stainless steel sheet and Mild steel sheet joints such as welded zone, heat affected zone and parent material subjected to different Welding Parameters. The Experimental procedures are developed by factorial design and the regression model developed from the experimental results through Response surface methodology. The variable parameters are Electrode force, Weld Current and the Weld time. The measurable parameters are Tensile strength and hardness. The optimization process is carried out by Response surface methodology and the optimized parameters are defined the quality of the welded steel joints. The optimized welded parameters are expressed the effective joining and improve the quality of the welded member.

Keywords: Spotwelding, Response Surface Methodology, Electrode Force, Weld Current, Weld Time.

Volume: 6 | Issue: 4

Pages: 123-127

Issue Date: October , 2016

DOI: 10.9756/BIJIEMS.7542

Full Text

Email

Password

 


This Journal is an Open Access Journal to Facilitate the Research Community